SGC Smartuner SG-231 Technical Information download pdf (Page 27)

SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

P.O.Box 3526, 98009 Fax: 425-746-6384 or 746-7173 Tel: 425- 746-6310 or 1-800-259 7331

E-mail: [email protected] Web site: http://www.sgcworld.com

Blanking: ‘b’ is displayed (Press MEM to enter).

FREQUENCY STEP: .1, .5, 1.0, or 2.5 kHz.

FREQ Step: ‘F’ is displayed (Press MEM to enter).

9.7

ADJUST ‘FAST’ INCREMENTAL VALUE (CMD + FAST)

While pressing CMD and FAST simultaneously, but momentarily,

turn main tuning knob to adjust the incremental value by .1, .5, 1.0,

or 10 kHz. To store this value into memory, press MEM.

9.8 C A L I B R ATE FREQUENCY DISPLAY (CMD +

"XCVE")

To calibrate the frequency display, press CMD and "XCVE" simul-

t a n e o u s l y, but momentarily. All three mode LED’s

("XCVE",RIT,SPLIT) will be on. Adjust by turning the main tun-

ing knob. To store this calibration, press MEM.

Note: If the frequency display has been re-calibrated, the default

channel memory frequencies will be offset by the same corrected

value. If an adjustment has been made, it may be necessary to re-

enter the frequency into the 20 memories.

10.0 POWER - ON OPTIONS

1 0 . 1 “CMD” BUTTO N

Note: Holding the “CMD” button upon power up will cause the

LCD to display “C”. This has no user function and is for factory

use only. The sequence will abort to normal radio operation about a

second after the “CMD” button is released.

1 0 . 2 R E S TORE FA C TO RY MEMORY DEFA U LTS (MEM)

To restore factory memory defaults, hold MEM upon powering up

of unit.

1 0 . 3 BACKLIGHT DEFA U LT ON / OFF and LED Te s t

Power up the radio while depressing the ‘LIGHT’ button. Hold it

until either ‘dl ON’ or ‘dl OFF’ is displayed. Select whether you

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 94 95

No comments

SGC Smartuner SG-231 Technical Information Page 27